jprentice94
Well-Known Member
- Joined
- August 11, 2013
- Messages
- 421
- Reaction score
- 4
- Location
- Butte county
- City, State
- oroville ca
- Year, Model & Trim Level
- 91 sas explorer
I loved going mudding when my ex was stock but a few puddles made me sketched out because of the stock ecu placement so i finally got arount to moving it heres how i did it
1. Unscrew ecu
2 take glove box off
3.cut circle peice off of plastic holder of ecu
4. Move ecu up to behind glove box probably the hardest thing to this as wires dont like moving
5. Hold the ecu up with holder and screw some self tapping screws into the pror screw holes i was only able to get 2 in but if you have more patonce could probably get 3 in p.s it is going into heater box so use small screws
6. Cut the glovebox right at back line and install
i do not have a glove box right now cause it was broken
1. Unscrew ecu
2 take glove box off
3.cut circle peice off of plastic holder of ecu
4. Move ecu up to behind glove box probably the hardest thing to this as wires dont like moving
5. Hold the ecu up with holder and screw some self tapping screws into the pror screw holes i was only able to get 2 in but if you have more patonce could probably get 3 in p.s it is going into heater box so use small screws
6. Cut the glovebox right at back line and install
i do not have a glove box right now cause it was broken
