Search results

I am going to install HID headlights in my car and did a quick search of posts and a couple of people have said that the wiring for the lights is reversed. If anyone has any info on if this is correct or not that would be great. I have a 2002 Explorer XLS any replys are greatly appreciated

i had the same problem on my explorer and the way i fixed it was going to a GM dealer and go to the parts department and ask for the ACDelco fuel system treatment plus. just add it to an empty tank,fill the car up i may take up to a week before your gauge working, i add a bottle every oil change...

if you haven't done the pcm upgrade i would suggest that i had it done yesterday. i used to have idle problems hot and cold and the upgrade solved all my issues if you have any questions let me know David

i cant help you with the creaking part but i have experienced the rough idle since i bought the car, i would change the spark plugs first if there old this can be one problem. on my car the new plugs made no difference. Yesterday i went to the dealership and for around $100 dollars i did the PCM...

I had a similar issue with my power mirrors where i checked all the fuses and they were good. The problem i had was the wire that runs from the fuse box to the mirror switch had either been pinched or had internally blown. The only way to see if its the wire is to use a voltmeter with a...

i had a pretty bad engine shake and once in a while i would get an engine surge. My car had the original PCM software from the factory i just called the dealership and i guess the upgraded to the newest available software not sure which version they used but my car is running alot better then...

i finally did the PCM upgrade and it has made a huge difference the idle smoothed out probably 95% improvement the cars shifting is much smoother and more consistent and at lower RPM it cost me about $115 canadian but well worth the money:thumbsup:

I have finally figured out how to fix my faulty readings coming from the fuel sender unit and float combo. I had a friend of mine that had similar problems with one of the jimmys he owned. i went to the local GM dealership and picked up the ACDELCO complete fuel system treatment plus. at first i...

good news Once the computer relearned everything the car runs better still a little rough idle but that was happening before the recall, im looking into the PCM upgrade hope it helps, as for the recall all they did was unclip the old harness connector and added a inline fuse to both of the...

ford completed the cruise control on my car a couple of days later my car started acting weird, today when i went to start my car the engine started abnormally, i turned the car off and when i went to start the car again there was no power going to anything in the car , it was acting as if there...

i need to know what the voltage going to the switch and if anyone has the wiring diagram that would be extreamly helpful

im not sure what has happened to power mirrors switch stopped working checked fuse in car and under hood and all the fuses are good tested for ground and ground is good switch is fine have spare from working 02 explorer what is left besides tracing the power wire if anyone has a wiring diagram...

getting rid of condensation the best way i have found to get rid of condensation is to go and get a dessicant gel pack and make to small hole in it and tie some dental floss in the holes. all you need to do is place the dessicant pack into the housing putting it through the lightbulb socket...