Search results

A few weeks ago I replaced my tranny filter and the fluid that came out during the filter replacement. Ever since that day, I get hard shifts from neutral into 1st gear. The vehicle will rev up and then suddenly clunk into 1st gear. Also, this only happens about 30% of the time. I've now...

I've got a 2002 Ford Explorer with a radiator leak. I searched the forum, but didn't find much info. I was expecting/hoping to find a full write-up on the replacement process. Does anyone know of a write-up they could point me to? My leak is very slow. Just a few drops of coolant per day...

Engine oil dripping from right side of radiator. Appears to be engine oil. The car has been sitting all weekend and I'm seeing approx. 1-2 drips per day. I can't really see what's leaking. Can someone educate me of what's is in that general area which would be suspect? Note: Vehicle has 140k...

I searched, but didn't find much help beyond what I've already tried. How can I get the rear up broken free from the CV spline? It's just the 35mm nut in the center, right? I didn't see any bolts on the back side of the steering knuckle. I've already beat it with a BFH, Air hammer, and...

A couple weeks ago, I replaced all the front suspension components on my 2002 Ford Explorer. I couldn't find the right rental tool to remove the inner tie-rod, So, I popped the CV joints out so I could fit a pipe-wrench on the inner rie-rod which worked well. Now, it appears as though there is...

I've heard people claim that it's best to re-use the original Ford gasket for the transmission. I'm going to be replacing my transmission filter this weekend and want to know your guys opinions.

How long do these hubs typically last? I'm changing out my rear strut assemblies due to the common broken spring problem. I was wondering if now would be a good time to change the wheel bearings in the hubs. I've got 140k miles on my 2002 Explorer 4WD. Also, so I can quickly get the right...

The stabilizer bar link has been spray periodically with penetrating oil for the past couple days now. I've hit it with 3lb hammer and even an air hammer. I have the top nut off, but nothing seems to be able to drive it downwards!

I got the back nut off the front driver strut, but the bolt is stuck in the control arm and strut. Air hammer is no help. 3lb sledge isn't quite doing the trick. Do I need to remove the whole control arm with strut and take it to a shop to be pressed out? I can't imagine a bigger PITA. I've...

I need suggestions. I can't fit a puller on there. I've tried whacking the heck out of a pickle fork. I've tried heating. I've even tried cutting the damn tie rod off with a reciprocating saw (sawzall), but the tie rod metal appears to be too tough. Any other suggestions?

Very frustrating. I started a job replacing a ton of suspension components to find out the tool I rented to remove the inner tie rod won't work. It would work if the nut on my tie rod was on the outside of the vehicle, but my tie rod is different and has the nut on the inside. Orielly's and...

My fuel gauge hasn't been working in 4+ years on my 2002 Ford Explorer. Just curious if anyone else is experiencing this issue. If so, what was the fix?

I haven't had a working fuel gauge in my 2002 Ford Explorer for about 6+ years now. I'd really like to figure out why. I went as far one day to drop the fuel tank and verify the sender unit was working. After that I gave up. Please help me get back on track. Note: It will randomly start...

I have a 2002 Ford Explorer. The 4x4 Low light blinks approx. 20 times when I press it. Can anyone tell me why and how to fix?

I just got a call from my mechanic. He claims the tire treads are all at different depths which is a very bad thing and could ruin my drive terrain b/c I have a 4WD vehicle (2002 Ford Explorer). So, he wants to sell me 4 new tires. I'm thinking B.S! I'd love to hear the thoughts from the...

Mechanic called me today and told me that the clanking noise I'm hearing is from a broken rear spring. They want to install "quick struts" for $510. Is this really necessary? I've been driving it like this for weeks and the only difference I've noticed is the clank noise when I hit a bump...