Search results

That's why I think it could be fixed right fairly simply, I don't want to hack a bunch of stuff up and try to remember what I did if I have a problem later. It seems it functions like it is supposed to, just opposite when it comes to the clutch.

Feel free to walk me through that

Verified my jumper, and it is accurately wired up. Early 97 must function differently than the 98, the 97 did have the message center but I wouldn't think that has any bearing on this since I am using the 98 body harness for the ac.......

I will trace those wires down, thanks, I never thought about it being my fault, haha everything has worked great so far, but it is very possible that I may have gotten mixed up with my jumper, that is the only place I messed with the wiring,

Thanks bud, I appreciate your help, the engine harness is early 97 btw.

I currently do not have diagrams for either year, It has been quite awhile since I did the swap and the jumper, I could probably used the c115 pinout to verify my jumper if anyone has them available

Haha right, I had it in my head that I typed it out, probably because I have been typing in the searches so many times, key on engine off "click" clutch engages in all knob settings, engine running clutch engages in every setting, (including off) except the a/c and defrost settings, switch to ac...

I've searched and can't find enough info to fix this problem, 98 xlt explorer had 4.0 sohc, now has 97 5.0 with electric 4406 swap, I'm using the engine harness from the 97, but made a jumper to the 98 engine bay harness. (Been driving this around for a couple other years, just now getting...

Where do I find a schematic on the transmission? Could I swap everything over from the other tranny?

I have a 2000 5.0 the transmission went out I just finished putting in a replacement it is a 4r70w out of a 95-96 f150 I cannot get it to shift out of second I swapped over all the sensors from the other tranny and still not working still has a flashing od off light please help I am frustrated I...

I have a 2000 5.0 the transmission went out I just finished putting in a replacement it is a 4r70w out of a 95-96 f150 I cannot get it to shift out of second I swapped over all the sensors from the other tranny and still not working still has a flashing od off light please help I am frustrated I...

also will a 5 speed from a 98 f150 4.2 fit in the ranger?

i have a 94 ranger with 4cyl 5 speed, i want to do a 5.0 swap im not concerned about it fitting or anything the main concern i have is how to keep it fuel injected without chopping up a bunch of wires, i would really like a plug n play type harness i could pull out of another vehicle, like the...

awesome, thanx for the replies, im going to go try all your suggestions

i have a grey one in great shape, off my moms 01 she wrecked.....

ok its a 2001 5.0 ex, the speedo dont work, all other gauges do tho, there is no abs light unless i unhook the vss, i tryed putting in a new vss, but no change, the cruise dont work either, please help me, what fuses do i need to check and maybe a wiring diagram for the vss to the abs box to...

i have a 2001 5.0 2wd speedo quit working i pulled out the speed sensor in the rearend and cleaned it still didnt cure it, no abs light or anythins so im stumped, also how much gas milage should i expect by taking off the cluthc fan back two cats addind an x pipe with 40 series flowmasters and a...

my 01 5.0 has 100000 miles, it has developed i miss under a load, i took it to have the codes checked and it threw out two codes, p0402 said to replace dpfe sensor, the other code was p0300 which is random multiple misfire, i want to know if i can just bypass the egr system completely and...

ok i have a 2001 xlt 5.0 when i first start it up for the day it runs perfect until it warms up a bit then is starts chugging under a load (accelerating) but i hold it steady rpm it runs smooth the engine light came on but i disconnected the batt and it hasnt came on since but the condition is...

i might be interested in it if the price is right, what kind of truck do you have because i have a t case and trans from a 95 f150 if yours is going out

cool and the engine is out of an ex so i have the front drive, motor mounts, etc. but no wiring whatsoever, i have a 2wd 5.0 tht has been rolled but im trying to get it to work in my 77 f150, lol i do have an extra 5.0 lying around, lol it came out of an ex i jus need computer and wiring...

thanx and yea its a floor t case, yea i just want a 4x4 soooo bad, i want to lift it and throw on some 33s, but first i want to get 4x4 working in it, i just didnt know if the front axle would be a bolt in, or if it would be better to stay 2wd

i have a 2wd 5 speed sport, '99 wanting to drop in a '01 5.0 2wd, will the drive shaft fit? it would be cool to keep it 5 speed with the 5.0, too bad the tranny wouldnt bolt up to it, what kind of quarter mile times could i see with the 5.0 in the sport? and how much does a sport weigh compared...

i kinda need a parts list.....

swapped all electrical into my old ford truck, (put the cab and bed on 2001 explorer frame) im using the pcm, steering column and just about everything else from the same car, plugged in the steering column plugs, (all that were coming out of it) and i cant get it to start i was told its a pats...