SCT X2 - Transfering data

coach_al · January 22, 2006

I have the latest SCT X2, I cannot figure how to get a data capture file on the X2. I have installed live link on the PC, set up some parms but that's where I have a problem. I want to be able to Data Capture some parms to send to Doug@SCT.

aldive · January 22, 2006

Contact Doug Studdard at Bama Chips ( http://www.bamachips.com/ ); he will know what you need.

Good luck .....

rocket 5979 · January 22, 2006

Here you go man. Follow this to a T and it should work for you as long as you got one of the latest Xcal2's. You can also use the older mode of pass-through datalogging which requires a laptop and a USB cable.

http://www.sctflash.com/forum/attachment.php?attachmentid=822

coach_al · January 24, 2006

Rocket,
Thanks. I followed the manual and found that I do not get the option "Add Live Log File to Device option" on Page 3. I will try to reinstall the software....

SCT X2 - Transfering data

coach_al

Active Member

aldive

rocket 5979

Resident Gearhead

coach_al

Active Member

Featured images

Featured images

Similar Threads