Check list for back brakes this weekend

So I am working on my first Ford this weekend. I am going to do the rear rotors and pads and replace the front pads while I am at it. I have an 02 Explorer 4.0 4X4 XLT. I have been doing my research on here and was just going to see if I got it all. Here is what I found.

I can expect to have to hammer around the rotor to get it lose and may have to deal with a lip formed by the parking break pade. I should not have to replace those though. Everything is a pretty straigh foward rear brake job correct?

I would definitely plan on replacing the parking brake shoes and hardware.

Check out these threads:

http://explorerforum.com/forums/showthread.php?t=337837

http://www.explorerforum.com/forums//showthread.php?t=192616

Good luck and be sure to keep us posted.

Also if you don't have spring pliers. Make sure you have some patience. They can be difficult to put back on without the right tool.

Here is a good thread for installing the parking brake hardware kit: http://www.explorerforum.com/forums/showthread.php?t=270833