egr tube | Ford Explorer Forums

  • Register Today It's free!

egr tube

  1. A

    EGR Valve to Upper Intake Bolt Size and Thread Pitch

    Hey guys! I was hoping that some would know off the top of their head or if they happened to have the bolts that mount the intake tube to the EGR valve. It's a 98 4.0 OHV. When I purchased my vehicle it had incorrect sizes and is currently leaking. To clarify this is the tube that enters the...
  2. A

    Misfire - EGR - '00 4.0L OHV

    Hello again, So, I'm back with another question. Could a broken, open, EGR tube cause my Misfire issues? I assume that the answer is yes, however I have seen many, and I mean many, different answers about the subject in my search, and figure the Explorer Forum should be my final...
  3. B

    Multiple issues: Fuel Gauge, EGR Valve, Cruise Control

    Well... Seems I've made more work for myself... About six months ago I undertook two jobs that tested my skill level. Both with guidance from this blog, as well as hours spent under and above my '02 (June '01) Explorer Sport V6, 4.0L 4x4. I am currently dealing with multiple issues, and I'm...
  4. W

    EGR Tube Nut wont budge

    So was working on my Explorer last weekend, wanting to change out the EGR Valve, as it is froze and rusted. Well I was trying to get the one nut off, and I ended up breaking the EGR Tube off clean at the nut down at the exhaust. So I ordered a new EGR tube, and am ready to put on the new EGR...
  5. P

    New in Olathe, KS

    I just bought a 1997 Explorer XLT 5.0 AWD. I had a 2004 Ranger XLT before this but I have a kid on the way and needed 4 doors. I always wanted a V8 Ranger so I figured I would get one with 4 doors. I love this Explorer but its time for upgrades. I have a 4406 swap, Eddie Bauer center console...
  6. R

    EGR pipe 2002 4.6l V8 Mountaineer snapped!!

    Where can i order a EGR pipe for a 2002 4.6l V8 Mountaineer asap and for a desent price please reply ......... it snaped of when i was replacing the intake manifold so iam with out a car thanks ryan
  7. R

    Cant remove plenum - stuck on EGR tube? 99OHV

    once everything is disconnected this should just lift straight up...right? This EGR tube is not moving...I know from reading the "Lower intake removal" sticky that there is a washer in there, but am afraid to snap the plastic plenum yanking on it. Wont budge. Any suggestions - I...
  8. G

    Egr tube

    AFTER REPLACING THE UPPER AND LOWER INTAKE MANIFOLD GASKETS, I FOUND THAT I HAD NOT CORRECTLY INSERTED THE EGR TUBE BACK INTO THE INTAKE MANIFOLD. I HAD A MASSIVE VACUUM LEAK. THE ENGINE WOULD ONLY RUN AT HIGHER RPM AND DIED WHENEVER THE THROTTLE WAS BACKED OFF. I HAVE TEMPORARILLY BLOCKED THE...
Back
Top