injectors

Hey everybody, first time post! I've been fixing up my fiances explorer and the most recent surprise has been fuel injector 2 has died (p0202, p0302), open inside injector and I have good reading from plug. Decided to buy a full set on Amazon (sorry, have a smoke or a joint if it bothers you...

Well, it just died. It was sitting there idling while I shut the gate. It stumbled a few times, then in about 3 sec, it quit. Will not re-start, but when I try to crank it, it cranks strong, as usual, it actually “starts” for maybe 1 or 2 hits/cylinder firings, then stops firing. It still...

Hi guys I own Explorer 2008 4.6 V8 and I decided to clean the injectors - partially because I want to learn how all these things work, partially because I changed the fuel filter and found it to be really bad and dirty. So I unmounted the fuel ramp end extracted the injectors. Then I made some...

Three weeks ago I ran across a 1998 xlt 4.0 SOHC on Craig List for $800.00 132k on the body and 75k on the motor. I had to check it out. The truck was bought about 3 years ago from a service station with a broken timing chain and no compression on cylinders with valves closed. The motor was...

Friend of mine has a 1998 sport, with a crank no start. We found that the key was bad, causing the theft light to blink, I missed the light since he was cranking it and I was under the hood, we used the spare, and it started right up, we thought we had fixed the problem. Then when he tried to...

I have been battling a slight misfire for a while. It generally consisted of a jerking motion whenever you try to accelerate hard and the actual misfire starts at almost exactly 2000 rpm. This misfire only happens under acceleration, so if you are just cruising, it is really smooth. The misfire...

Have 2002 Explorer. Twice this month, it would not start, it would turn over, but not start. Then suddenly started. Yesterday, drove to store, no problems, and when I came out, it would not start. It acts like it wants to start, but wont kick in. I can hear the fuel pump and the safety...

Since we have the 4.6 can we do any mods the mustangs use? I want to get pulleys, an intake manifold, upper intake, Throttle body, bigger MAF housing, bigger injectors. and ill probably make an e-fan by using the other posts on here as my guide. I was just wondering if any one has these...

Im running very lean, i dont know how lean...but I am. Im eventually going with a supercharger from a Nissan Frontier/Xterra. Ive already upgraded the throttle body to a 66mm, and bigger MAF housing, and CAI. So if I dont do anything about the fuel system now, im looking for trouble. As of...