hobbitak
Member
- Joined
- November 18, 2007
- Messages
- 46
- Reaction score
- 1
- City, State
- Montana
- Year, Model & Trim Level
- 03 Explorer 4.0L 4x4
The answer for me was to clean my Idle Air Control (IAC) valve. I also cleaned my Mass Airflow Sensor again. No problems since.....that was a couple of months ago and we drove through -20 weather turning the engine off at gas stations and leaving the vehicle off overnight at a hotel and it started right up the next day. One thing that was an indicator for the IAC was that when the truck wasn't wanting to start I could hold the accelerator to the floor and it would start.