hauntedxpast
New Member
- Joined
- December 17, 2008
- Messages
- 3
- Reaction score
- 0
Hey guys.. First post.. Um basically.. I have a 1992 Explorer Eddie Bauer Edition.. I bought the vehicle about a year ago to have a 4x4 for the snow, etc.. But here is the problem.. It has the push button 4x4. I push the 4x4 button and no light.. I push the low range button and no light. I figure the lights could be out. I take the panel off and put an electrical tester to it, with no luck. No juice at all. I continued by checking all fuses and all are in working order, same with the fuse panel, both under hood and in the passenger compartment. I then raised the vehicle on jack stands and tested the wires coming from the engine compartment.. No juice.. Does anyone have ANY idea why? Any input would be greatly appreciated... I need all the help I can get and am willing to try anything at this point.. The local 4x4 shops want almost $250.00 to look at it, and I can't afford that because I'm sure if they do it, it will be atleast another $300.00 to fix it.. Please help!!!