1994 Ranger 4.0 engine

[Jack Avant]

Hello, My name is Jack Avant. I am a new member and I just bought a 1994 Ranger that is not running yet. The motor in it was removed from a 1998 explorer. My first question is will the upper intake work that is on the explorer engine. This looks like there is only one gas line hookup and I have 2 gas lines. Am I at the right place to ask these questions? Thanks in advance for your help

 

[SoHK_alumni]

Think you'll be needing to do some hunting around for some better matching parts.

If the EFI system on the Explorer 4.0 only has one fuel line, it's for a later, higher pressure EFI system that your '94.

As a guess, you'll need the fuel injectors and upper intake from a '94 or similar rather than the later bits.

Might be a few other snags in the mix as well, things like cam position sensor as well as others that need to match your '94 systems.

 

[Jack Avant]

Thanks for the feed back. I am looking for a upper and lower intake for that engine,

 

[Jack Avant]

1994 Ranger Clutch

I got the engine running and now the clutch will not work I replaced the master cylinder and without the line hooked up the pedal had resistance and as soon as I hooked up the slave cylinder I lost all resistance I have opened the bleed line at slave cylinder to remove air but still no clutch. Can someone please tell me the proper way to bleed this system???

 

[RangerX]

It's not easy to get these clutches bled right.
This thread has a couple video links: http://www.explorerforum.com/forums/showthread.php?t=327079
If you search around the forum, you'll find other tips and tricks on doing it.