Exploring007
New Member
- Joined
- February 13, 2013
- Messages
- 4
- Reaction score
- 0
- Year, Model & Trim Level
- 1997 Ford Explorer XLT
Hi guys,
Having problems with my gears engaging. Story goes whilst driving I accidentally hit the gear in neutral without realising, went to accelerate realised it was just revving and whilst still accelerating hit it into drive. Car made a couple of bangs and now it wont engage into any gears. When I put it in drive or reverse it just revvs but does not move.
Got the torque converter checked out and there were only minor issues that wouldn't cause this problem. From what I can see, Transmission looks fine from the outside, no metal filings in the oil and the input shaft rotates as it should. Transfer case seems to be functioning fine as well from the outside.
Out of ideas at the moment with what could be wrong, so any help is greatly appreciated!
Car is an automatic and 4 litre 6 cylinder XLT model.
Thanks guys.
Having problems with my gears engaging. Story goes whilst driving I accidentally hit the gear in neutral without realising, went to accelerate realised it was just revving and whilst still accelerating hit it into drive. Car made a couple of bangs and now it wont engage into any gears. When I put it in drive or reverse it just revvs but does not move.
Got the torque converter checked out and there were only minor issues that wouldn't cause this problem. From what I can see, Transmission looks fine from the outside, no metal filings in the oil and the input shaft rotates as it should. Transfer case seems to be functioning fine as well from the outside.
Out of ideas at the moment with what could be wrong, so any help is greatly appreciated!
Car is an automatic and 4 litre 6 cylinder XLT model.
Thanks guys.