2 Questions

[myrtlebeachexpl]

First: Does Anyone Have A Vacuum Diagram Of The Vacuum Tree On A 1993 Ford Explorer. I Think I May Have Some Of The Vacuum Hoses On That Tree Mixed Up And I Need A Diagram. Please Help!

Secondly, My Power Windows... None Work...all 4 Wont Go Up Or Down. Sometimes They Will Go Down But Just Barely. If I Gently Guide It With My Hand And Power It Up, It Will Go. Is This The Motor Or Maybe A Fuse/switch/circuit Problem? There is a clicking sound when the switch is purshed Please Advise.

Jeff

 

[EMG7895]

 

[techieman33]

The windows is a pretty common thing there are little plastic gears in the motor that get chewed up. You can replace just the gears but it can be a lot of work, if you do some searching you can probably find instructions on how to do it.

 

[BP_93explorer]

I need to do the same thing. I believe there are a few threads that talk about it. This is just the first one I came to: http://www.explorerforum.com/forums/showthread.php?t=129888

 

[Truck39Trash]

All four do the same thing?, maybe it is a common problem for all four or one problem that causes this to happen

 

[BP_93explorer]

Mine started with the passanger side. A few months later the driver side started having problems. Both were able to go up and down it just wouldn't do it smoothly. Then the driver side stopped completely unless helped by someone. The passenger side still works a little. Both motors sound just fine. I may do this project next week. First I need to fix the damn oil leak(s)

 

[myrtlebeachexpl]

Power Windows Fix

The Gear Bushing Plugs Worked Great! Expensive Though, $8.00 For Only 3 Of Them. Can Get A Little Pricey Of Your Fixing All 4 Windows, Ha.

If You Dont Have $32.00 To Splur On Plastic Gear Bushings At Advanced Auto Parts, Buy 1 Foot Of 3/8 Rubber Hose. Cut 3 Sections Out And Stuff Them In There - Works Just As Good!

Jeff

 

[myrtlebeachexpl]

vacuum tree diagram

The Vacuum Tree Diagram Was Helpful, But The Position Of The Tree On The Diagram Is Misportioned To The Actual Shape And Vacuum Ports On The Actual Tree. What I Mean Is, On The Digram The Ports Go In A Circle Around The Vacuum Tree, But On The Actual Vacuum Tree, Some Of The Ports Are On Top Of Eachother, Not Actual A 'wrap-around' Of Vacuum Ports.

Im Still Having A Rough Idle, Small Amount Of Fumes, And Terrible Gas Mileage. Perhaps It Is The Fuel Pressure Regulator - But I Dont Have A Gauge To Test It. Any Other Way To Test It?

Jeff