2000 Sport leaf springs

[Powerstroked]

Looking for some advice. My 2000 Sport has sagging rear leaf springs. I want to replace them and get the truck level or up a little in the back. Should I use factory OEM springs or is there a good after market spring? I would hate to put factory springs on it and still have the back lower. Is their any other componets that would cause it to sag in the back? Thanks in advance.

 

[Dan Whitaker]

If you have the monoleaf springs you can use multileaf from a 4 door. If you have the multilef springs you can go with Warrior shackles or add-a-leafs.

 

[celly]

If you have the monoleaf springs you can use multileaf from a 4 door.

Yeah, what he said. I used to have multi-leafs from a '96 4 door with quite a few miles on them and they did the trick for my old '00 Sport. Hit a junkyard. There should be LOTS out there.

 

[Powerstroked]

Sounds like the multileaf is the way to go. What years can I use to fit my 2000.

 

[GTexplorer]

any 2nd gen. (95-01)

 

[BlackHawk09er]

i have the same prob on my 01 sport

what years can i use?

 

[Dan Whitaker]

i have the same prob on my 01 sport

what years can i use?

It clearly says in the post above yours.

 

[Powerstroked]

Code "U", "F", "H". As I began my search I found these codes. Does it matter which spring I use? Thanks again for all the help.