Wvumountaineers1
Member
- Joined
- May 30, 2014
- Messages
- 22
- Reaction score
- 0
- Year, Model & Trim Level
- 2002 Explorer Sport
Hello all,
Couldn't find anything around the forum so apologizes if this has been posted. I went through all the testing and such and my front wiper motor is needing replaced. My question is it appears the motor itself is mounted to a plate up against the back of the engine compartment which the plate is held in by four bolts. Can I just remove the plate to access the bolts for the motor and do it that way or does the driver side cowl have to be removed. If anyone has proper steps to do this job that would be phenomenal! Thanks to everyone who lends a hand I appreciate it immensely!
Couldn't find anything around the forum so apologizes if this has been posted. I went through all the testing and such and my front wiper motor is needing replaced. My question is it appears the motor itself is mounted to a plate up against the back of the engine compartment which the plate is held in by four bolts. Can I just remove the plate to access the bolts for the motor and do it that way or does the driver side cowl have to be removed. If anyone has proper steps to do this job that would be phenomenal! Thanks to everyone who lends a hand I appreciate it immensely!