polyeric
New Member
- Joined
- July 17, 2011
- Messages
- 3
- Reaction score
- 0
- City, State
- San Jose, CA
- Year, Model & Trim Level
- erikpoly@gmail.com
Hello All,
I have read some great posts about replacing the power window assemble on my ford explorer but I want to make sure my power assembly is really shot before I replace it.
Here is what is happening.
The rear passenger window roles down just fine but will not go back up. There is no noise coming from the motor when I hit the up button on the window. Currently the window is stuck about 7 inches down and I have an piece of cardboard "securing" my car...
Also, is there any other wsy i can raise my window w/out the power window assemble?
Thanks
Eric
I have read some great posts about replacing the power window assemble on my ford explorer but I want to make sure my power assembly is really shot before I replace it.
Here is what is happening.
The rear passenger window roles down just fine but will not go back up. There is no noise coming from the motor when I hit the up button on the window. Currently the window is stuck about 7 inches down and I have an piece of cardboard "securing" my car...
Also, is there any other wsy i can raise my window w/out the power window assemble?
Thanks
Eric