Dignan
Well-Known Member
- Joined
- July 31, 1999
- Messages
- 631
- Reaction score
- 0
- City, State
- Idaho Falls, Idaho
- Year, Model & Trim Level
- '99 5.0
Ok, so I replaced the hub assembly on my Superduty and the studs to hold the wheel on are a different thread pattern. The guy at NAPA said that the proper size is 14mm x 2.22. The only size close to that which I can find is 14 x 2.0. Is there a 2.22 thread pitch? or is the NAPA guy wrong? Of course I can go buy the 2.0s and try it and return them if they don't fit, but I am coming here for some insight first.
