2007 Explorer 4.0l MAF issues, Plug has no power and need to know voltage of wires going in to Plug have to get this working asap | Ford Explorer Forums

  • Register Today It's free!

2007 Explorer 4.0l MAF issues, Plug has no power and need to know voltage of wires going in to Plug have to get this working asap

ribbons

New Member
Joined
June 23, 2025
Messages
1
Reaction score
1
City, State
Shiloh, TN
Year, Model & Trim Level
2007 Ford explorer XLS
Had multiple codes come up (14) all dealing with evap, air flow. tested the MAF plug and no power is going through. Wires are showing low voltage on 5 of them and 12 v on one which is power. someone spliced in left bare wires to MAF plug. Need to get new plug in and figure out how to wire it in to the original ford wiring harness. There is another plug that also seems to be malfunctioning it is next to radiator hose on drivers side of ignition/Spark plug coil someone spliced into it also. ANY HELP WOULD BE GREATLY APPRECIATED. Including what colors plug in where to MAF plug and This other plug by Radiator hose.

image0 (1).jpeg


image1.jpeg


image2.jpeg
 






Featured Content

Back
Top