TXFergie
New Member
- Joined
- May 18, 2016
- Messages
- 6
- Reaction score
- 1
- City, State
- Hutto, Texas
- Year, Model & Trim Level
- 2020 Limited, 2007 EddieB
Good day! I just joined the forum (haven't posted an official intro yet) but I have used the forum before for some fixes on my 2007 Explorer. My latest venture is a Rear Blend Door actuator for my heat/AC. It is now stuck on heat and I can't leave it like that going into the Texas summer. It's got the infamous clicking noise that changes when you move from heat cold to hot. I have seen several posts and videos on replacing the FRONT actuator but not the back one. I know that there should be two actuators as well - one for heat/cool, and one for floor vent/overhead vent.
Could someone guide me in the direction of a good procedure, video, or thread on accessing the rear blend door actuator? I'm not sure of how bad it is to get the rear panels off, and I don't have enough room to get to them through the cupholder and storage tray openings.
Thanks in advance!
Rick
Could someone guide me in the direction of a good procedure, video, or thread on accessing the rear blend door actuator? I'm not sure of how bad it is to get the rear panels off, and I don't have enough room to get to them through the cupholder and storage tray openings.
Thanks in advance!
Rick