Paul L
New Member
- Joined
- July 28, 2023
- Messages
- 1
- Reaction score
- 0
- City, State
- Wa
- Year, Model & Trim Level
- 2010 ford explorer XLT V6
I have a 2010 Ford Explorer Xlt 4.0 v6 4x4 base model having transmission issues. When it popped up I had 4 codes of 2 incorrect gear ratios and 2 pressure solenoid. (P0775. P0732). I replaced the solenoid and filter obviously fluid but still have a delayed response in gear 1 to 2 or going straight to 3.
But the 1 to 2 (or 3) goes smooth when I let off the gas at around the RPM it normally shifted at.
And it did that as well before this work when it started happening.
But no gear clanks, I haven't gone into dying mode, it's actually already alot smoother. Does any one have an idea where to start next?
But the 1 to 2 (or 3) goes smooth when I let off the gas at around the RPM it normally shifted at.
And it did that as well before this work when it started happening.
But no gear clanks, I haven't gone into dying mode, it's actually already alot smoother. Does any one have an idea where to start next?
