Jrelyea
New Member
- Joined
- August 8, 2021
- Messages
- 3
- Reaction score
- 0
- City, State
- Douglass
- Year, Model & Trim Level
- 2010 explorer sport Trac
So a few nights ago I decided to spray my engine down with water. The engine was shut off when I sprayed it and it was pretty hot. About an hour later we left and while driving my truck started to putter. Now when i start it, it idles so rough is shakes the truck. It has no power when driving. Like I for it and it barely moves. It sounds like it's going to break down. My check engine light(which has been on) started blinking. Oh and let me add back in January we had a new transmission out in. Now just a few months later it doesn't shift like it's supposed to and the wrench light on my dash is on. Sometime told me that the band need some adjusting. I'm not sure! But I really need to get this truck running good before my mother comes to visit ( it's her truck that she have to me but still loves it). So any advice on how to fix it is greatly appreciated.
Oh now I did check the mass flow sensor to make sure it wasn't wet or anything. Checked all electrical connections asleep checked fuses. I did have to change the fuel pump fuel injectors fuse and fixed the connection from the fuse box to the battery. Radiator did have a little crack on the top but that has been there for a while( in starting to think that's how it was made)
Oh now I did check the mass flow sensor to make sure it wasn't wet or anything. Checked all electrical connections asleep checked fuses. I did have to change the fuel pump fuel injectors fuse and fixed the connection from the fuse box to the battery. Radiator did have a little crack on the top but that has been there for a while( in starting to think that's how it was made)