2013 Explorer - MyFordTouch Screen Calibration | Ford Explorer Forums

  • Register Today It's free!

2013 Explorer - MyFordTouch Screen Calibration

Doom3524

New Member
Joined
May 20, 2014
Messages
3
Reaction score
0
Year, Model & Trim Level
2013 Explorer
So, the screen calibration for my touch screen is way off. I am trying to find how to recalibrate my screen with no luck. Any help would be much appreciated.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.











Thank you very much, that worked!

Now, a new issue. I shut the car off, then turned it back on and now the touch screen is not working at all. I tried to go back into the calibration screen, but I couldn't touch anything to get it going once I got there. Any advice on this one?
 






Thank you very much, that worked!

Now, a new issue. I shut the car off, then turned it back on and now the touch screen is not working at all. I tried to go back into the calibration screen, but I couldn't touch anything to get it going once I got there. Any advice on this one?

Pull the fuse for MFT. Wait 10 minutes, reinstall. If that doesn't work disconnect battery for 10 minutes, reconnect. If that doesn't work see your dealer. Or if you've got lots of free time, just go to your dealer.
 






Well, I found that it was working, just the calibration went out of whack again. It seems that the calibration doesn't stick after I calibrate it. I did it again this morning (luckily I was able to figure out how off it was to hit the right buttons), and while I was typing a destination into the GPS, the calibration went out of whack again! This is getting ridiculous.
 






Hey everyone,

The calibration screen on MFT is meant to be used by the dealers in conjunction with their diagnostic tools. If you're having issues with your screen, I highly suggest you visit your dealership instead of doing this yourself.

Rebecca
 






Well, I found that it was working, just the calibration went out of whack again. It seems that the calibration doesn't stick after I calibrate it. I did it again this morning (luckily I was able to figure out how off it was to hit the right buttons), and while I was typing a destination into the GPS, the calibration went out of whack again! This is getting ridiculous.

Why would you not take it to your dealer to have it fixed? You are under warranty as MFT has I believe a 4 or 5 year, unlimited mile warranty. Let the dealer fix it as Rebecca said.
 






Featured Content

Back
Top