Cam Cornelius
Member
- Joined
- January 12, 2020
- Messages
- 24
- Reaction score
- 15
- Location
- Nashville, TN
- City, State
- Nashville
- Year, Model & Trim Level
- 2014 PIU
2010 CVPI
- Callsign
- K1CAM
Sorry, this is a cross post...I'm very new to the forum and tried to move my post from the PIU section, but couldn't. Moderators, please feel free to delete or move a post if you feel it is in the wrong section.
Just discovered that both radiator fan one and two have an issue in my 2014 PIU. I'm pulling codes P0480 & P0481. I've replaced the related fuses and relays in the fuse box under the hood...still no dice. Is there another fan control module or something I should be looking to replace or test on the canbus or under the hood? Both fans are showing a fault when looking at them in the dashboard in Forscan as well. Unpowered, they spin freely, so the bearings seem good. I find it kind of strange that both have failed, but then again I'm new to explorer (been a Crown Vic guy since about 95).
Just discovered that both radiator fan one and two have an issue in my 2014 PIU. I'm pulling codes P0480 & P0481. I've replaced the related fuses and relays in the fuse box under the hood...still no dice. Is there another fan control module or something I should be looking to replace or test on the canbus or under the hood? Both fans are showing a fault when looking at them in the dashboard in Forscan as well. Unpowered, they spin freely, so the bearings seem good. I find it kind of strange that both have failed, but then again I'm new to explorer (been a Crown Vic guy since about 95).
