2nd gen front sway bar

[rydinhigh]

I am going to take my sway bars off for some wheeling. What I need to know is the lower part of the sway bar by the tires is what I need to disconnect. I am assuming that I have to take off the top bolt and the bottom bolt. Also what about the bushing they look like they need to come of to get the bar out, are those a pain to get off? Any help would be greatly appreciated.

Thanks

 

[Alec]

There are 5 parts to the front endlinks: Bolt, nut, plastic spacer with inner bushings, and the 2 outer bushings. Basically you undo the bolt and it all comes out. If yours came stock like mine did with the bolt above the nut, reinstall it the other way next time to make it 10 times easier.

But yes, undo each side and bungie the bar up if you want to and have fun!

 

[rydinhigh]

Thanks alec.