4 wheel drive

[kw95ski]

:fire: I have a 93 Explorer that the 4 wheel drive doesn't work! When I push the 4 x 4 button on the dash, I get absolutely nothing. It used to make a clicking noise from the back panel but, now I don't even get the noise! How do I check the box in the back to see if it's good? I had this problem before and someone told me about pushing the white button in the back and a red light would come on but, I don't remember wether it was supposed to stay on or flash? It worked 2 weeks ago when it was 60 degrees outside and raining!! Now when we're supposed to get a foot of snow it decides to take a crap...go figure right?? Any help or suggestions would be greatly appreciated!! Thanks

 

[Blee1099]

Welcome to the site, try the following link: More specifically the section that pertains to the transfer case. http://www.explorerforum.com/Singleton/exp.html

 

[kw95ski]

thanks for your help & quick reply. now that i read some of the solutions from the site, bits & pieces of things are coming back including what a pain in the butt this job was!! thanks again! have fun in the snow!!

 

[adam45356]

take a hammer and tap or slighky harder than a tap on the shift motor mines worked asome for a yea sence i did that, and i had the exact simtoms of yours the clickng sound then not even a clicking sound, then hammer and mud here i come

Enjoy your 4x4

 

[ledgebutta]

I Also have a problem with my 4x4. when i push the 4x4 button the light comes on but when i go to drive it seems like its not engaged and it makes a clicking grinding noise. Not sure if its my Hubs or transfer case ? need it for the snow were getting today. any help would be great thanks...