4 x 4 help

[bambam634]

When i turn my knob to 4X4 no light comes on and it wont engage in 4 hi or low... i know the lights work because when i start the cluster shows the lights on
any tips

 

[DjDom]

The shifter motor probably burnt out.

 

[drdoom]

Check the wiring under there at the transfer case. Make sure it good connection.

 

[drdoom]

Also there is a dedicated thread for 4x4 troubleshooting procedure on this site.

 

[bambam634]

I checked a couple fuses and i had 3 burnt out replced the fuses and all works fine
kinda weird for 3 to burn out at one time
fuse for heater
fuse for 4x4
fuse for overhead console

 

[drdoom]

Glad to hear it! And thank you for posting the resolution.

 

[Pete Deering]

Also there is a dedicated thread for 4x4 troubleshooting procedure on this site.

Where?

 

[drdoom]

Where?

I believe it is a sticky thread near the top of the previous page.

 

[Pete Deering]

there is a dedicated thread for 4x4 troubleshooting procedure on this site. Where can I find it?