patarch1
Active Member
- Joined
- March 14, 2008
- Messages
- 56
- Reaction score
- 0
- City, State
- West haven ct
- Year, Model & Trim Level
- 97 Ranger
hi,
I had the lower and uppor ball joints replaced on my 97 ranger 4wd.
After a couple weeks I locked the hubs and tried engaging the transfer case (manual).
Going straight, the truck feels like it wheels are off center and it shakes a lot. What could have the mechanic forgotten or mis-assembled? Since they worked on both sides I have no reference to check. Prior to the ball joint replacement, everything was fine.
Thanks
Patarch1
I had the lower and uppor ball joints replaced on my 97 ranger 4wd.
After a couple weeks I locked the hubs and tried engaging the transfer case (manual).
Going straight, the truck feels like it wheels are off center and it shakes a lot. What could have the mechanic forgotten or mis-assembled? Since they worked on both sides I have no reference to check. Prior to the ball joint replacement, everything was fine.
Thanks
Patarch1
