Randy96
New Member
- Joined
- November 7, 2010
- Messages
- 9
- Reaction score
- 0
- City, State
- lewes de
- Year, Model & Trim Level
- 96
i have a 96 ohv just had front axle seals replaced when i got it back checked to make sure 4x4 still worked and u guessed it not working the vac lines and electrical plug were not connected i pluged them back in no problem 4x4 will engage if sitting still (4x4 auto) when moving even just off the break idle in gear if i turn the switch to 4x4 auto nothing happens and about 30 sec later 4x4 and 4x4 low lights flash and ides on what this could be i have the brown wire mod done to