Bob Bear Taylor
New Member
- Joined
- October 1, 2020
- Messages
- 3
- Reaction score
- 5
- City, State
- Charleston, IL
- Year, Model & Trim Level
- 2004 Sport Trac XLT
I have a 2004 Explorer Sport Trac 4WD XLT.
My 4x4 will not engage in either 4x4 High or 4x4 Low.
I have checked fuses (interior and under hood) and they all appear to be ok.
Today I replaced the Transfer Case Control Module (Motorcraft TM 101) at a cost of $253.19 to no avail!!
No lights flash or flicker on the 4x4 switch when I start the truck.
I am at a total loss as to what to try next.
Any input or knowledge would be greatly appreciated.
Thank you.
My 4x4 will not engage in either 4x4 High or 4x4 Low.
I have checked fuses (interior and under hood) and they all appear to be ok.
Today I replaced the Transfer Case Control Module (Motorcraft TM 101) at a cost of $253.19 to no avail!!
No lights flash or flicker on the 4x4 switch when I start the truck.
I am at a total loss as to what to try next.
Any input or knowledge would be greatly appreciated.
Thank you.
