4x4 wont engauage

[ruzztec]

I push the button but no light and its doen;t enguage. I have a low batt and I pushed the button and for about 2 sec the lights dim, so I know the connection is good. I tried testing the leds going to the transfer case and I get 2 that are .50 volts. At the puch button I have 2 .50 volt and to 13.4 volts. When I discommect the transfercase electric and puch the button it doesn't dim the lights so I know that the connection is good and fuse are good. What could it be. WOuld the atuolock cause the light ot not come on. I didn't think they would

 

[Alec]

I hate it when I can't get the spare to provide power! Sorry, couldn't resist.

 

[99SportX]

I hate it when I can't get the spare to provide power! Sorry, couldn't resist.

Same thing I was thinking LOL

Sorry, I have no idea what is wrong. Maybe fix your battery first.

 

[Robb]

I fixed the "4x5" part.................but I can't understand any of the rest. Sorry.

 

[MrShorty]

Have you cleaned the shift motor? It's such a common problem, and it sounds like you've verified that the shift motor is getting power, so that leads me to believe the shift motor is unable to shift due to dirt inside the motor. See www.glue.umd.edu/~singletn/exp.html

 

[ruzztec]

Have you cleaned the shift motor? It's such a common problem, and it sounds like you've verified that the shift motor is getting power, so that leads me to believe the shift motor is unable to shift due to dirt inside the motor. See www.glue.umd.edu/~singletn/exp.html

Nopesure haven't ill try that. Thanks lots