5.0 Explorer AWD transmission

[ped5stang]

I have a few AWD 5.0 Explorer transmissions available. I also have some AWD transfer cases available. You can email me at ped5stang@aol.com.

 

[section525]

I've bought a few things off ped5stang from eBay and he's a great seller.

Just out of curiousity.. do you have any 99+ ones.. and how much $? Thanks

 

[ped5stang]

I have a few 99 5.0 AWD transmissions available. I am selling these for $550.

 

[VairKing]

What is the benifit of the 99+ trans? I thought they were all the same?

 

[section525]

Well they're different than the earlier models.. as in you can't just plug them in. I had to do a custom wiring harness on mine. But they upgraded the internals to higher quality parts. I've torn into both my '96 and my '99 and the '99 looks like the inside of a computer! But supposedly they're just beefier and can handle more power.

 

[Fusion213]

What's the spline count of the output shaft? I'm just wondering.

 

[Swee294349]

will a 91-94 BW 1354 Manual TC bolt up to a 97 V8 transmission that has an AWD TC and work right?

thanks

 

[section525]

You'll need an adapter. I want to do the same thing too.

 

[Swee294349]

ok...i just noticed that in the post...espnfreak and i have been conversing over his v8 and his totalled 96...if we can't get the buy back on the 96, the v8 may be an option, but i wanted to know what's all involved....looks like i've found a good page of info and he happens to live in colorado as well. does advanced adapters have a website where i can check out the price of the adapter and the new spline?

thanks section

 

[section525]

http://www.advanceadapters.com/

If you buy the '96 back you won't need the front seats, will ya?

 

[Swee294349]

just got word section....IL law says the vehicle has to be 9 yrs or older on a buy back...otherwise i could have sold ya the seats. thanks for the link.

 

[fastford]

advance adapters are sold from summit racing i do not remember the part number but the price was 500.00 rather high but what else ya going to do somebody on this site has did this conversion you have to gut the trans i'm going to be doing this on my v-8 ranger conversion (using 98 mountaineer parts) i will post result when finished, probable about a month away though