gerardo1601
New Member
- Joined
- March 13, 2008
- Messages
- 6
- Reaction score
- 0
- City, State
- Maracaibo, Zulia
- Year, Model & Trim Level
- 1997 XLT
hello for everyone, a week ago, pull out the 5r55e vb, install the transgo shift kit
SK 44-55E, new epc solenoid, and a new internal wiring harness. fill it with new oil and start the engine. apply tw to all the screws at the correct setting and adjust the bands. only one problems remains, when start to move the first gears is very best than before, but at 30 kph i must to pull out the foot from the gas pedal to make the second gear let begins, the rest of the drive is better, i read many posts here about this trans, excuse me for my bad english!
SK 44-55E, new epc solenoid, and a new internal wiring harness. fill it with new oil and start the engine. apply tw to all the screws at the correct setting and adjust the bands. only one problems remains, when start to move the first gears is very best than before, but at 30 kph i must to pull out the foot from the gas pedal to make the second gear let begins, the rest of the drive is better, i read many posts here about this trans, excuse me for my bad english!
