power_manager
New Member
- Joined
- June 22, 2004
- Messages
- 1
- Reaction score
- 0
- City, State
- Ronk.,NY
- Year, Model & Trim Level
- 1997 Explorer
I've got a 1992 XLT (w/ 245cu in that has been sitting for a couple of years. After changing fuel pump, filter and starter brushes it finally started (barely) but very rough idle. Seemed to smooth out when warmer. Let sit again for a couple of weeks and will not start. Fires right up if I spray ether into throttle body and wil lcontinue to run if i continue to spray so I have spark. Measured fuel pressure at rail is 39psi and holding (pressure regulator good), noid light flashing on at least one injector (that I can get to) but does not even cough. gas is fresh. Vacumn lines all look intact. PVC valve is loose. Used to start with 2-3 cranks max. Any ideas?