96 XLT V8: Tripmeter/Odometer Fails, Speedo OK | Ford Explorer Forums

  • Register Today It's free!

96 XLT V8: Tripmeter/Odometer Fails, Speedo OK

YamahaRick

Well-Known Member
Joined
August 7, 2001
Messages
111
Reaction score
0
City, State
Metro ATL, Georgia USA
Year, Model & Trim Level
1996 XLT 5.0
To get trip/odometer working 100% once again, what should be done?

While I'm at it, are there any attractive alternative speedo/tach/etc. faceplates I should consider?

Current odometer reading is 217K; probably close to 5K short right now.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





There's a small plastic worm gear that deteriorates
from heat and breaks. A company called odometergear
sells a replacement gear to fix it. Cost is about $25-30
if I remember correctly.

They have a website with instructions on how to
replace the gear.
 






Or grab a junkyard unit, easier to swap if you don't want to do the gear...

Could grab a 2001+ Sport whiteface cluster...
 






They have a website with instructions on how to replace the gear.

Wow, the procedure is easier than I anticipated.

Thanks for the link. I plan to order a new worm gear and get it installed soon.
 






You're welcome and good luck with it.
 






I replaced to worm gear no fixy. I replaced instrument cluster no fixy.
Speedo is fine but no odo. Is there a sensor on the tranny?
 






Did you put your new worm gear into replacement instrument cluster?

Good luck, and drive safe.
 






Here is the service manual. For a 97, but should be the same (96 not as detailed). VSS I believe is on the transfer case. There may be two VSS if you have 4x4.
The odo uses the speedo signal, so that is weird.

1673201118672.png

1673201149096.png

1673201189274.png
 






Featured Content

Back
Top