BlasphemousMusic
Member
- Joined
- August 7, 2010
- Messages
- 39
- Reaction score
- 1
- City, State
- Stationed near Rapid City South Dakota
- Year, Model & Trim Level
- 97 XLT
Ok, detailed as possible here we go!
I have a http://esupport.sony.com/US/perl/model-home.pl?mdl=CDXGT54UIW&LOC=3
Spec sheet with wiring here http://www.docs.sony.com/release/CDXGT54UIW_install_EN_FR_ES.pdf
This is the CORRECT chart (or the most correct) I have found on the net.
**scroll down to the bottom to 95 ex and up*
http://www.installer.com/cars/by_car.php?carid=2125
I installed it first without using any harness except the one in the sony deck box. After trial and error it works. Then a friend who helped put it together had a bright idea of putting the ex wiring back together and using a store bought harness. We tried 2 types including the METRA one to no avail..
So we ended up taking the kits off, wiring it back to the truck directly. I have sounds out of all speakers, working sub, working amp (both aftermarket). The only issue I am having is the deck is not keeping memory.
I currently have the yellow and red from deck to yellow/black of truck. Its the only way I get power. I was told to take the yellow from deck to green/violet of truck and that should work. When I do that I get no power.
I have a few extra non hooked wires from the ex but no left over from the deck harness. Left overs I can recall are tan(or light brown) Blue/pink, green/violet, and gray.
.
I have a http://esupport.sony.com/US/perl/model-home.pl?mdl=CDXGT54UIW&LOC=3
Spec sheet with wiring here http://www.docs.sony.com/release/CDXGT54UIW_install_EN_FR_ES.pdf
This is the CORRECT chart (or the most correct) I have found on the net.
**scroll down to the bottom to 95 ex and up*
http://www.installer.com/cars/by_car.php?carid=2125
I installed it first without using any harness except the one in the sony deck box. After trial and error it works. Then a friend who helped put it together had a bright idea of putting the ex wiring back together and using a store bought harness. We tried 2 types including the METRA one to no avail..
So we ended up taking the kits off, wiring it back to the truck directly. I have sounds out of all speakers, working sub, working amp (both aftermarket). The only issue I am having is the deck is not keeping memory.
I currently have the yellow and red from deck to yellow/black of truck. Its the only way I get power. I was told to take the yellow from deck to green/violet of truck and that should work. When I do that I get no power.
I have a few extra non hooked wires from the ex but no left over from the deck harness. Left overs I can recall are tan(or light brown) Blue/pink, green/violet, and gray.
.
