ABS Sensor DIY | Ford Explorer Forums

  • Register Today It's free!

ABS Sensor DIY

chevman17

New Member
Joined
February 21, 2010
Messages
3
Reaction score
0
City, State
Flanders, NJ
Year, Model & Trim Level
'98 XLT 4x4
guys,
looking for a picture of where the ABS sensor is. I believe I need to clean it or replace it. I have no idea where its located... :thumbsup:
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Front or rear?

There are two on the front. One in the left bearing hub and one in the right bearing hub. On the front you can not buy the sensor seperate. It comes with the hub only.

As for the rear I don't know where it's located.
 






Front or rear?

There are two on the front. One in the left bearing hub and one in the right bearing hub. On the front you can not buy the sensor seperate. It comes with the hub only.

As for the rear I don't know where it's located.

sorry, i meant all 4. I would assume the rear sensors would be located near/on the hub then. Thanks
 






3 actually

two are in the front hubs and one is on the rear axle somewhere
 






The rear ABS sensor is located very close to the top of the middle of the "pumpkin"
It is the only electrical connection to the rear axle, so it would be easy to spot.
 






The rear ABS sensor is located very close to the top of the middle of the "pumpkin"
It is the only electrical connection to the rear axle, so it would be easy to spot.

excellent, thanks :dpchug:
 






Featured Content

Back
Top