06MDxplorer
New Member
- Joined
- January 7, 2015
- Messages
- 3
- Reaction score
- 0
- City, State
- Maryland
- Year, Model & Trim Level
- 2006 explorer
I have a 06 explorer with a 4.6, its throwing a code c1235, the abs light is on as is the tool light and the traction control light, yesterday in the snow I went to leave a parking spot and the whole truck bogged down and nose dived when I tried to leave, I was finally able to get it to break free and thats when all the lights come on. The lights now come on when I go over 20mph. When the lights come on the four wheel doesn't kick on like it normally does when it slips in the snow it just stays in rwd, but the four wheel drive seems to work fine if I turn it on my self, I also noticed when I drive in the snow with the four wheel drive on at slow speeds while turning it makes a noise coming from the from driver wheel that sounds like a grinding noise. The noise started last year when I was in a unplowed parking lot that had 20+ inches of snow. Any suggestions would be greatly appreciated thanks!