adding sub and power seat?

[5-keepers]

Just bought a complete interior out of an 01 sport trac. Mine is also an 01. I am going to add the power seat to mine, I believe the wiring is below the mat to just plug it in. Someone please correct me if I'm wrong. Is there anything else that I need to get before I do the swap?
Next question, I got the factory sub and amp as well. I do not see any factory wiring for this. I know where it is supose to be but there isn't any there. What do I need to get or is it just a lost cause?
Thanks for any and all help

 

[5-keepers]

got the seats done, there was no wiring had to run a power and a ground, works good. Still waiting on a reply about the sub

 

[steventadams]

If the wiring isn't there you're going to have to run some wire... But if you're going to be running the wire anyway you might as well run some heavier gauge and put a stronger amp and a bigger sub in there. Somewhere on the site there is a how-to to making the opening in the factory enclosure fit a 10"...

 

[sporttractuner]

5-keep...what colour is the interior, I need the panel behind the rear seats, maybe we can make a deal?

 

[5-keepers]

Interior is grey, I used the panel behind the seats but mine had 2 of the tabs broke( the ones that the plastic screws go thru). Still mounts fine and looks good. I can take a pic of it if you want. Make me an offer, shipping will be the suck part. I will be getting rid of a bunch of stuff that I don't need so I will start a thread in the proper place.

 

[N2FORD]

You may run into a problem with that panel. They are not the same, the 03 has the middle shoulder belt and the 01 does not. The 03 rear panel has an extra catch up high for the seat to hook on. You would have to take the hook out to let the 01 piece in your 03, which would not let it hook up high.

 

[sporttractuner]

thanx N2... oh well, just keep watching the wreckers then.

Maybe I'll just re think my Amp-Rack and come up with something new.

 

[scottdunahoo]

If the wiring isn't there you're going to have to run some wire... But if you're going to be running the wire anyway you might as well run some heavier gauge and put a stronger amp and a bigger sub in there. Somewhere on the site there is a how-to to making the opening in the factory enclosure fit a 10"...

my st did not come with the sub or amp but i got it free from a friend, anyone know the best way too hook up the stock amp the one that came in the adrenalin i dont have the plugs that go into the amp i was hoping it would be like the power seats and be under the matt somewhere