amp bypass

[Digger196]

if i get a harness to bypass the amp, do i need to take out my new HU? and is that all i got to do or do i need to do stuff in the back?

the rear pass. side channel is out and is anoying so going t fit that.

if i can't find a harness co u disconnect the wires going into the amp and connect the wires together w/o the amp?

what is the better opption?

 

[KEbert]

You do it in the back, where the amp is.

 

[Digger196]

is the harness just join the wires. like same linkage as the amp but does nothing?

 

[KEbert]

Yep. It just bypasses the wires from going into the amp.

 

[Alec]

But depending on the harness you may need to rewire your HU.

 

[Digger196]

oh ****, what harness do i need that will allow me NOT to rewire the HU!

 

[Dan Whitaker]

Hey digger, i got a wire harness from rutch field for $15. You can save the $5 set of instrutios as I will scan and e-mail them to you. Mine is a 97 so I don't know if there is a difference in how it is done.

 

[nas19320]

I got the harness from crutchfield also to bypass the amp. Really simple way of doing it, no cutting.

 

[Digger196]

Alright guys i did the bypass and i bought the harness at curcuit city and one of the ends fit but the other end didn't so i conneted the right ones together.

it sounds AWESOME, but the pass. rear speaker is now not even working but the whining sound is gone!