Are Warrior Shackles still the choice of most on here? I'm looking to get a set soon.

[unpredictable1]

I'll be doing this in the near future, I believe before I do the AAL.

From what I can tell I need the 9/16 bolt holes for my 2000?

I just read many posts where people had to re-drill existing holes of the shackles they purchase online.

What are the best to just open the box, and install?

Cheers fellas.

 

[Maniak]

You need 14 mm bolt holes. Very early WAR-153 shackles were drilled at 13mm because of a miss-measure from the person on EF that was helping them get dimensions. It was quickly fixed and the WAR-153 has had the correct 14mm hole for many years. It can be a tight fit thanks to the powder coating but you don't need to "drill" the hole out any more.

~Mark

 

[unpredictable1]

You need 14 mm bolt holes. Very early WAR-153 shackles were drilled at 13mm because of a miss-measure from the person on EF that was helping them get dimensions. It was quickly fixed and the WAR-153 has had the correct 14mm hole for many years. It can be a tight fit thanks to the powder coating but you don't need to "drill" the hole out any more.

~Mark

Thanks a bunch.

Cheers!

 

[MidnightRebel07]

That's what I'm running on my '03 Sport Trac that's lifted. Great product.

 

[Govna47]

My '01 Sport has them too, First thing I did when I got the truck over a year ago