auto to manual swap with electric t-case

[greaseballpaul]

got the trans in and its stuck in 4low. I'm going to do the under hood red/white stripe ground trick but would still like the nss jumped into the neutral position sensor like you mentioned is done on your truck snoranger. Please let me know what colors you tied in to make that happen on yours.

Thanks a million in advance.

 

[greaseballpaul]

Nevermind. Its done. The shift lever position sensor is wired to ground then out to the red with blue stripe so the starter will only spin when the trans is in neutral. The red with white stripe is wired direct to ground under the hood and the 4x4 turns on and off as it should.