Bezel add-on for toggle switches..

[Glen4X4]

I'm going to be adding roof off-road lights and who knows what else, I did a generic 'paint' drawing to try and show what I'm looking for. I want to be able to mount it under the bezel or screw right on top of the bezel and have a removable backside to hide the wires leading to the switches, didn't know if someone here had come up with some kind of combo like this or if there were something out on the market like this I want it to house approx 4-6 switches. I know some on this board can do fab work and wanted to see if someone could come up with something like this for me I can drill the switch holes out myself incase toggle holes needed are different sizes. If someone could build me one of these I will pay half before you start and rest when its done.

Here is my drawing. I want something of this sort.

 

[Stic-o]

If you have a single din aftermarket stereo, you can use the space above, or below to mount the switchs. This is what I have always done. Nice and clean.

 

[Glen4X4]

If you have a single din aftermarket stereo, you can use the space above, or below to mount the switchs. This is what I have always done. Nice and clean.

Oh....yeah, I never gave that a thought, thanks for the tip.