Body Molding DIY | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

Body Molding DIY

03Mach1

Active Member
Joined
November 28, 2006
Messages
87
Reaction score
0
City, State
New Orleans, La
Year, Model & Trim Level
03 XLT
Has anyone taken off all of the body molding?

I have an 03 NBX which has the wheel molding, lower molding on both doors, and the lower half of both front and rear bumpers that were once gray textured.

I am planning on painting them with automotive paint to match the rest of the exterior(Black). I am going to leave the bumpers on the truck and mask off but I would prefer to take everything else off to make the prep and paint go alot easier and faster.

The best I can tell the lower door panels are held on by plastic clips at the top and the bottom is countoured to slip around the lip of the door.

I think my biggest concerne is breaking the clips during the removal. Has anyone done this, if so do the clips have a tendancy to break, where can replacements be purchased?

Any info would be great as I am planning on doing this over the weekend along with re-painting the two faded door pillars, faded rear pillar, fadded roof rack pieces, faded cowl, and am contemplating painting the mirror housings to match the truck.
 






Back
Top