JamesB
New Member
- Joined
- September 26, 2005
- Messages
- 6
- Reaction score
- 0
- City, State
- Ottawa, ON
- Year, Model & Trim Level
- 95 Sport
Hi all,
I am rebuilding my 4405 and pulled the clutch pack out to inspect for abnormal wear or overheating. In the process, I forgot to place the clutch disks in such a way as to remember their orientation.
My question is this: what is the orientation of disk placement in the clutch carrier housing (7C108)? Do the clutch pads face out of the housing (A: wearing pads facing towards you when you place them) or do the pads face into the housing (B: wearing pads facing away, or down into the housing)?
ie: A: [__] pads facing ^^ (how I believe it goes)
or: B: [__] pads facing vv
Thanks for your help guys! I have lots of pictures of the rebuild in progress and plan to do a "photo-writeup" on the process - including all those tricky bits like the hidden snap-ring required to remove the input shaft (7017) which is required to remove the planetary gear set.
I am rebuilding my 4405 and pulled the clutch pack out to inspect for abnormal wear or overheating. In the process, I forgot to place the clutch disks in such a way as to remember their orientation.
My question is this: what is the orientation of disk placement in the clutch carrier housing (7C108)? Do the clutch pads face out of the housing (A: wearing pads facing towards you when you place them) or do the pads face into the housing (B: wearing pads facing away, or down into the housing)?
ie: A: [__] pads facing ^^ (how I believe it goes)
or: B: [__] pads facing vv
Thanks for your help guys! I have lots of pictures of the rebuild in progress and plan to do a "photo-writeup" on the process - including all those tricky bits like the hidden snap-ring required to remove the input shaft (7017) which is required to remove the planetary gear set.