MyExplorer03v8Lim
Well-Known Member
- Joined
- June 20, 2016
- Messages
- 261
- Reaction score
- 14
- Year, Model & Trim Level
- 2003 Explorer 4.6L
I've made a few threads about this engine swap. Basically anything they could screw up, they did. Everything was done with absolute speed in mind, rather than quality.
While tightening down my new outer tie rods, I noticed a part that seemed to not be seated properly. It looks like an AC condenser or something like that. There are two mounting locations for it, but it's just hanging there disconnected. It seems to be only supported by the lines going to and from it.
Here are a few pictures of the part, I'd love to know what it is so that I can determine how high up on my list of things to fix this should be.
http://imgur.com/a/CbyjZ
While tightening down my new outer tie rods, I noticed a part that seemed to not be seated properly. It looks like an AC condenser or something like that. There are two mounting locations for it, but it's just hanging there disconnected. It seems to be only supported by the lines going to and from it.
Here are a few pictures of the part, I'd love to know what it is so that I can determine how high up on my list of things to fix this should be.
http://imgur.com/a/CbyjZ