Tylers02
Well-Known Member
- Joined
- November 24, 2008
- Messages
- 437
- Reaction score
- 9
- City, State
- Overland Park, KS
- Year, Model & Trim Level
- 2002 Limited
Alright I got layed off from my current job, but it was a blessing in disguise because I hated it and im finally going to go back to school. Any way to pass the time im looking for some in-expensive mods to do, which I know there is not that many. I will get this thread started with a write up on how I removed and painted the lower grille and fog light bezels. Hopefully this helps someone out that wants to do this mod and post anymore ideas of cheap mods you have with a writeup on how to do it.
First un-plug the fog lights and then there is three 7mm bolts holding the fog light onto the bezel. Second remove the three 10mm quick nuts holding the bezel, 2 are pretty obvious and one is kind of hidden.
As for the lower grille there are two quick nuts on top and four on the bottom
Then here is the final outcome, I think it looks a lot better but I would still like to replace the lower grill with a billet one but im not sure if it would look weird because I dont really want to change the upper grille(I like the stock look)
I also removed the lower vallance that attaches to the bumper, Its just like 10 or so of those plastic rivet things and two 10mm bolts. The rivets are two pieces, a center pin and the housing that expands when the center pin is inserted.
First un-plug the fog lights and then there is three 7mm bolts holding the fog light onto the bezel. Second remove the three 10mm quick nuts holding the bezel, 2 are pretty obvious and one is kind of hidden.
As for the lower grille there are two quick nuts on top and four on the bottom
Then here is the final outcome, I think it looks a lot better but I would still like to replace the lower grill with a billet one but im not sure if it would look weird because I dont really want to change the upper grille(I like the stock look)
I also removed the lower vallance that attaches to the bumper, Its just like 10 or so of those plastic rivet things and two 10mm bolts. The rivets are two pieces, a center pin and the housing that expands when the center pin is inserted.
