cheap way to lift my 94 Explorer

[xploder1208]

i want to lift but i dont want to pay an arm and a leg.
what is the absolutely cheapest way to lift 94 explorer

 

[little x]

Go to the Offroad Explorer Suspension section and read the stickie called F-150 Spring Seats and Shackles.

 

[xploder1208]

thanks

 

[94Gexplorer]

or make your own http://www.therangerstation.com/tech_library/WasherCoilSpacers.htm

 

[nitro71]

Cheapest way is with a body lift. Hands down.

 

[xploder1208]

i heard a body lift can wear through the body lift over time though

 

[section525]

i heard a body lift can wear through the body lift over time though

What does that mean?

Like it eats itself?

 

[Dannyboy]

i heard a body lift can wear through the body lift over time though

here we go again...


I'd tell you this has been discussed but I know you're already too lazy to search.

 

[Blacksheep Josh]

I feel like if you don't want to search you don't deserve to just be spoon fed the answers. With the amount of time you spent to "Create New Thread", type of your post, you could've searched and found 3 articles by yourself.

Stop being lazy. Do your own research and learn something.

 

[little x]

I feel like if you don't want to search you don't deserve to just be spoon fed the answers. With the amount of time you spent to "Create New Thread", type of your post, you could've searched and found 3 articles by yourself.

Stop being lazy. Do your own research and learn something.

That's why I didn't just include a link to the thread I referred him too

 

[Slowlyvverot]

stop being lazy. Do your own research and learn something.

123

 

[Tbars4]

i want to lift but i dont want to pay an arm and a leg.
what is the absolutely cheapest way to lift 94 explorer

...Someone had to answer his question properly...


...You borrow a forklift...

 

[Blacksheep Josh]

Hahahahaha no installation required!!

 

[Flip4ford]

Um Have you guys priced a forklift???????? That's not cheap at all!!! A rock or block of wood, would be cheaper!!

 

[xploder1208]

is it possible to do add a leaf to the rear twice (as in buy two 2" kits) for a 4 inch lift in the real then get 4" lift springs in the front?
im very new at the modifying stuff and new at this site.
please help (without criticism please)

 

[Tbars4]

...You will find some very useful info in my signature...

 

[xploder1208]

Thank you

 

[Tbars4]

...You are very welcome...

 

[xploder1208]

also... i want cragar soft 8's
the only one i can find in 15x8 have either 4" back spacing or 4 3/4
i read that preferred backspacing was 3.75
whats the difference?

 

[Tbars4]

... from 3.75 to 4 is a 1/4"...

...do a search for cragar soft 8's and you will find a lot of info on them..