Con rod bearing shell clearance?

[janolsson]

Just a quick Q
My cd drive has crapped out on me so i can't check my manual (ON disc only) and done a search but can't find the info.

What is the clearance values for the con rod bearing to crank??
Thanks
PS hope not too many hangovers after the fourth

 

[2000StreetRod]

According to Haynes

My Haynes Repair Manual specifies the following:

4.0 SOHC connecting rods:
Rod journal diameter 2.125 to 2.126 inches
Out-of-round and taper limits 0.0003 inch
Bearing oil clearance:
Desired 0.0003 to 0.0024 inch
Allowable 0.0005 to 0.002 inch
Connecting rod side clearance (endplay) 0.0036 to 0.0106 inch

 

[janolsson]

My Haynes Repair Manual specifies the following:

4.0 SOHC connecting rods:
Rod journal diameter 2.125 to 2.126 inches
Out-of-round and taper limits 0.0003 inch
Bearing oil clearance:
Desired 0.0003 to 0.0024 inch
Allowable 0.0005 to 0.002 inch
Connecting rod side clearance (endplay) 0.0036 to 0.0106 inch

Again thank you 2000StreetRod