directionls don't work, but hazards do

[jbas123]

Ok well my directionals stopped working the other day, actually sometimes they work fine, and others they don't work at all. but the hazards still work fine. Sometimes if put the directional on left or right and leave it on and put the hazards on the directional will work for a short period of time. Randomly I'll hear the clicking noise of them without even touching them or the hazards. Anyone have any suggestions on how to fix this problamo? Thanks

 

[timlagios]

There should be two different relays for the hazzards and blinkers

 

[jbas123]

Is. Haha. So how do I go abouts fixing it? And does it have anything to do with the fuses?

 

[NJMike]

The symptoms coming and going, working sometimes and not other times, is most likely not fuse related. Fuses, unless they are loose, will either be functional or not. Chances are you're looking at a bad MFCS (Multi-Function Control Switch) in the steering column. Check this thread to see what's involved to swap it out. If it's your first time, it shouldn't take you more than 30 minutes.

http://www.explorerforum.com/forums/showthread.php?t=137784&highlight=control+switch

Mike