Does anyone make a 4x2 lift kit?

[LoneStarExplorer]

Ours is 4x2 but we really like the cool look of a 4x4 and the pre-runner look.

So, whaddaya say?

 

[Keeper0311]

Well you can give the Torsion Bars a twist to gain up to 2" of lift up front, and from there for a 2wd you can look into getting a set of lift spindles. For the rear look into lift shackles such as Warrior 153's.

Are you just aiming for the look, or actually gonna take it out and about?

 

[tooltime]

Look up Camburg.com We installed a 6.0 lift on our sport trac.

 

[danwaters]

If you want a cheap way. about 500 bucks for a pair of Fabtech 3.5 lift spindles. Make sure you get ones that are for a Ranger Edge.

 

[tooltime]

Hey DAn, I just checked out your vehicle specs page. Sounds like a really nice truck. We recently purchased our ST, and like you, that is the direction I eventually want to end up going. What would you go with as far as a rear gear for the 4.0? Im thinking 4.30's, and a Detroit locker. Or a really aggressive gear driven limited slip.

 

[LONO100]

hey lonestar, check out my registry link in my signature. its pretty much what you are going for. it isnt all show and no go though, my truck does work! let me know if you got any questions.